Publications

Below is a list of our book chapters, journal publications, and conference proceedings.  Downloadable PDF copies are provided for personal use only.

Book Chapters

 

Encyclopedia of Sus Tech Cover

  1. Anton, S. R. and Karami, M. A., 2017, Piezoelectric Energy Systems, chapter in Encyclopedia of Sustainable Technologies, Volume 4, Ed. Martin Abraham, Elsevier, United Kingdom
MAT4ENERGY Cover

  1. Anton, S. R., 2016, Chapter 5: Piezoelectric Conversion, chapter in Materials for Sustainable Energy Applications. Conversion, Storage, Transmission and Consumption, Eds. Xavier Moya and David Munoz-Rojas, Pan Stanford Publishing, Singapore

Journal Articles

 

  1. Safaei, M., Meneghini, R. M., and Anton, S. R., 2018, Force Detection, Center of Pressure Tracking, and Energy Harvesting from a Piezoelectric Knee Implant, Smart Materials and Structures, Vol. 27, No 11, 114007 (13 pp.). (Copyright by IOP Publishing)
  2. Safaei, M., Meneghini, R. M., and Anton, S. R., 2018, Energy Harvesting and Sensing with Embedded Piezoelectric Ceramics in Knee Implants, IEEE/ASME Transactions on Mechatronics, Vol. 23, No 2, pp. 864-874. (Copyright by IEEE)
  3. Safaei, M., Meneghini, R. M., and Anton, S. R., 2017, Parametric Analysis of Electromechanical and Fatigue Performance of Total Knee Replacement Bearing with Embedded Piezoelectric Transducers, Smart Materials and Structures, Vol. 26, No 9, 094002 (15 pp.). (Copyright by IOP Publishing)
  4. Ray, C. A. and Anton, S. R., 2017, Multilayer Piezoelectret Foam Stack for Vibration Energy Harvesting, Journal of Intelligent Material Systems and Structures, Vol. 28, No. 3, pp. 408-420. (Copyright by SAGE Publications)
  5. Van Buren, K. L., Hall, T. M., Gonzales, L. M., Hemez, F. M., and Anton, S. R., 2015, A Case Study to Quantify Prediction Bounds Caused by Model Form Uncertainty of a Portal Frame, Mechanical Systems and Signal Processing, Vols. 50-51, pp. 11-26. (Copyright by Elsevier)
  6. Anton, S. R., Erturk, A., and Farinholt, K. M., 2014, Piezoelectret Foam-Based Vibration Energy Harvesting, Journal of Intelligent Material Systems and Structures, Vol. 25, No 14, pp. 1681-1692. [1] (Copyright by SAGE Publications)
  7. Anton, S. R., Erturk, A., and Inman, D. J., 2012, Bending Strength of Piezoelectric Ceramics and Single Crystals for Multifunctional Load-Bearing Applications, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 59, No 6, pp. 1085-1092. (Copyright by IEEE)
  8. Anton, S. R., Erturk, A., and Inman, D. J., 2012, Multifunctional Unmanned Aerial Vehicle Wing Spar for Low-Power Generation and Storage, AIAA Journal of Aircraft, Vol. 49, No 1, pp. 292-301. (Copyright by AIAA)
  9. Gambier, P., Anton, S. R., Kong, N., Erturk, A., and Inman, D. J., 2012, Piezoelectric, Solar and Thermal Energy Harvesting for Hybrid Low-Power Generator Systems with Thin-Film Batteries, Measurement Science and Technology, Vol. 23, No 1, 015101 (11 pp.). [2] (Copyright by IOP Publishing)
  10. Anton, S. R., Erturk, A., and Inman, D. J., 2010, Multifunctional Self-Charging Structures using Piezoceramics and Thin-Film Batteries, Smart Materials and Structures, Vol. 19, No 11, 115021 (15 pp.). [3] (Copyright by IOP Publishing)
  11. Park, S., Anton, S. R., Kim, J.-K., Inman, D. J., and Ha, D. S., 2010, Instantaneous Baseline Structural Damage Detection using a Miniaturized Piezoelectric Guided Waves System, KSCE Journal of Civil Engineering, Vol. 14, No 6, pp. 889-895. (Copyright by Springer)
  12. Lallart, M., Anton, S. R., and Inman, D. J., 2010, Frequency Self-Tuning Scheme for Broadband Vibration Energy Harvesting, Journal of Intelligent Material Systems and Structures, Vol. 21, No. 9, pp. 897-906. (Copyright by SAGE Publications)
  13. Anton, S. R., Park, G., and Inman, D. J., 2009, Reference-Free Damage Detection using Instantaneous Baseline Measurements, AIAA Journal, Vol. 47, No. 8, pp. 1952-1964. (Copyright by AIAA)
  14. Anton, S. R. and Sodano, H. A., 2007, A Review of Power Harvesting using Piezoelectric Materials (2003-2006), Smart Materials and Structures, Vol. 16, No. 3, R1-R21. [4] (Copyright by IOP Publishing)

[1] Featured article of JIMSS listed in the Editor’s Choice – SMASIS 2014 collection.
[2] Featured article of Measurement Science and Technology listed in the Research Highlights of 2012.
[3] Featured article of Smart Materials and Structures listed in the Research Highlights of 2010.  Also listed amongst the top 20 most cited articles published in 2010 in Smart Materials and Structures.
[4] Most downloaded paper in Smart Materials and Structures in 2007.  This article was downloaded more than 500 times that year (and was among the top 3% of the Institute of Physics downloaded articles).  Currently has over 1800 citations.

 

Conference Proceedings

 

  1. Carlson, J., Tiberi, Z., Safaei, M., Ponder, R. I., and Anton, S. R., Parametric Testing of Surrogate Knee Replacement Bearings with Embedded Piezoelectric Transducers, Proc. ASME SMASIS, 2018, SMASIS2018-8037 (9 pp.).
  2. Ponder, R. I., Safaei, M., and Anton, S. R., Validation of Impedance-Based Structural Health Monitoring in a Simulated Biomedical Implant System, Proc. ASME SMASIS, 2018, SMASIS2018-8012 (8 pp.).
  3. Safaei, M. and Anton, S. R., Self-powered Multifunctional Instrumented Knee Implant, Proc. ASME SMASIS, 2018, SMASIS2018-8078 (11 pp.).
  4. Safaei, M., Ponder, R. I., and Anton, S. R., Detection of Compartmental Forces and Location of Contact Areas with Piezoelectric Transducers in Total Knee Arthroplasty, Proc. SPIE, 2018, Vol. 10595, 105951Q (10 pp.).
  5. Ehite E. H. and Anton, S. R., A Low-Cost Modular Impact-Based Experimental Setup for Evaluation of EMI Based Structural Health Monitoring at High Rates, Proc. SEM IMAC, 2018, (10 pp.).
  6. Kettle, R. A. and Anton, S. R., Multi-tonal Based Impedance Measurements for Microsecond State Detection, Proc. SEM IMAC, 2018, (7 pp.).
  7. Ponder, R. I., Safaei, M., and Anton, S. R., Development of Surrogate Biomedical Knee Implants for Validation of Embedded Smart Sensors, Proc. ASME SMASIS, 2017, SMASIS2017-3879 (7 pp.).
  8. Safaei, M. and Anton, S. R., Experimental Evaluation of Sensing and Energy Harvesting Behavior of Implanted Piezoelectric Transducers in Total Knee Replacement, Proc. ASME SMASIS, 2017, SMASIS2017-3881 (8 pp.).[5]
  9. Kettle, R. A., Ehite, E. H., and Anton, S. R., Development of an Electromechanical Impedance Based Condition Monitoring System with Multi-Tonal Excitation, Proc. Vibration Institute Annual Conference, 2017, (18 pp.).
  10. Hoummadi, E., Safaei, M., and Anton, S. R., Design, Analysis, and Fabrication of a Piezoelectric Force Plate, Proc. SPIE, 2017, Vol. 10170, 101700W (11 pp.).
  11. Poissenot-Arrigoni, B., Scheyer, A., and Anton, S. R., Determination of Orthotropic Mechanical Properties of 3D Printed Parts for Structural Health Monitoring, Proc. SPIE, 2017, Vol. 10168, 101681D (9 pp.).
  12. Safaei, M. and Anton, S. R., Analytical and Finite Element Performance Evaluation of Embedded Piezoelectric Sensors in Polyethylene, Proc. SPIE, 2017, Vol. 10172, 101720I (12 pp.).
  13. Scheyer, A. G. and Anton, S. R., Impedance-Based Structural Health Monitoring of Additive Manufactured Structures with Embedded Piezoelectric Wafers, Proc. SPIE, 2017, Vol. 10168, 1016827 (10 pp.).
  14. Tefft E. C. and Anton, S. R., A Multiple Degree of Freedom Model of Piezoelectret Foam in an Updated Multilayer Stack Configuration, Proc. SPIE, 2017, Vol. 10164, 1016404 (13 pp.).
  15. Kettle, R. A., Dodson, J. C., and Anton, S. R., High Frequency Impedance Measurements for Microsecond State Detection, Proc. SEM IMAC, 2017 (9 pp.).
  16. Safaei, M. and Anton, S. R., Sensing and Energy Harvesting Performance, and Fatigue Life of Embedded Piezoelectric Transducer in Total Knee Arthroplasty, Proc. ASME SMASIS, 2016, SMASIS2016-9216 (11 pp.).
  17. Kettle, R. A. and Anton, S. R., Rapid Evaluation of Mechanical Boundary Conditions using Impedance Based Structural Health Monitoring, Proc. SPIE, 2016, Vol. 9805, 98051S (13 pp.).
  18. Safaei, M. and Anton, S. R., The Effects of Dimensional Parameters on Sensing and Energy Harvesting of an Embedded PZT in a Total Knee Replacement, Proc. SPIE, 2016, Vol, 9799, 97992P (13 pp.).
  19. Tefft, E. C., and Anton, S. R., A Multiple Degree of Freedom Modeling Approach of Piezoelectret Foam in a Multilayer Stack Configuration, Proc. SPIE, 2016, Vol. 9799, 97991P (12 pp.).
  20. Kettle, R. A., Dick, A. J., Dodson, J. C., Foley, J. R., and Anton, S. R., Real-Time State Detection in Highly Dynamic Systems, Proc. SEM IMAC, 2016, (9 pp.).
  21. Contreras, C. E., Parkison, A. E., Wilson, B. E., Meneghini R. M., and Anton, S. R., Geometric Effects on Embedded Piezoelectric Energy Harvester in Knee Replacement Bearing, Proc. ASME SMASIS, 2015, SMASIS2015-9063 (11 pp.).
  22. Ray, C. A. and Anton, S. R., Evaluation of Piezoelectret Foam in a Multilayer Stack Configuration for Low-Level Vibration Energy Harvesting Applications, Proc. SPIE, 2015, Vol. 9431, 943111 (11 pp.).
  23. Wilson, B. E., Meneghini, R. M., and Anton, S. R., Embedded Piezoelectrics for Sensing and Energy Harvesting in Total Knee Replacement Units, Proc. SPIE, Vol 9431, 943111E (10 pp.).
  24. Wilson, B. E., Anton, S. R., and Meneghini, R. M., Development of Biomechanical Knee Force Model for Evaluation of Piezoelectric Sensors for In-Vivo Monitoring, Proc. ASME SMASIS, 2014, SMASIS2014-7692 (5 pp.).
  25. Anton, S. R., Taylor, S. G., Raby, E. Y., and Farinholt, K. M., Powering Embedded Electronics for Wind Turbine Monitoring using Multi-Source Energy Harvesting Techniques, Proc. SPIE, 2013, Vol. 8690, 869007 (9 pp.).
  26. Choi, M., Farinholt, K. M., Anton, S. R., Lee, J.-R., Park, G., Multi-Source Energy Harvesting for Wireless SHM Systems, Proc. SPIE, 2013, Vol. 8690, 869008 (10 pp.).
  27. Keyser, R., Migliori, R., Morgan, T., Anton, S. R., Farinholt, K. M., and Meneghini, R. M., Mechanical Strength of Bone Cement With and Without Adjuvant Screw Fixation in Knee Replacement, Proc. IMAC, 2013.
  28. Anton, S. R. and Farinholt, K. M., Piezoelectret Foam-Based Vibration Energy Harvester for Low-Power Energy Generation, Proc. ASME SMASIS, 2012, SMASIS2012-8224.
  29. Anton, S. R., Taylor, S. G., and Farinholt, K. M., Multi-Source Energy Harvesting for Wind Turbine Structural Health Monitoring Node, Proc. ASHMCS, 2012.
  30. Anton, S. R. and Farinholt, K. M., An Evaluation on Low-Level Energy Harvesting using Piezoelectret Foam, Proc. SPIE, 2012, Vol. 8341, 83410G-10.
  31. Anton, S. R. and Inman, D. J., Electromechanical Modeling of a Multifunctional Energy Harvesting Wing Spar, Proc. AIAA/ASME/AHS ASC, 2011.
  32. Anton, S. R. and Inman, D. J., Performance Modeling of Unmanned Aerial Vehicles with On Board Energy Harvesting, Proc. SPIE, 2011, Vol. 7977, 79771H-15.
  33. Gambier, P., Anton, S. R., Kong, N., Erturk, A., and Inman, D. J., Combined Piezoelectric, Solar and Thermal Energy Harvesting for Multifunctional Structures with Thin-film Batteries, Proc. ICAST, 2010.
  34. Anton, S. R., Erturk, A., and Inman, D. J., Strength Analysis of Piezoceramic Materials for Structural Considerations in Energy Harvesting for UAVs, Proc. SPIE, 2010, Vol. 7643, 76430E-11.
  35. Qing, X. P., Anton, S. R., Zhang, D., Kumar, A., Inman, D. J., and Ooi, T. K., Autonomous Self-Powered Structural Health Monitoring System, Proc. SPIE, 2010, Vol. 7650, 765011.
  36. Anton, S. R., Erturk, A., Kong, N., Ha, D. S., and Inman, D. J., Self-Charging Structures Using Piezoceramics and Thin-Film Batteries, Proc. ASME SMASIS, 2009, SMASIS2009-1368.[6]
  37. Park, S., Anton, S. R., Inman, D. J., Kim, J.-K., Ha, D. S., Instantaneous Baseline Damage Detection using a Low Power Guided Waves System, Proc. IWSHM, 2009, pp. 505-512.
  38. Erturk, A., Anton, S. R., Bilgen, O., and Inman, D. J., Effect of Material Constants and Mechanical Damping on Piezoelectric Power Generation, Proc. ASME IDETC, 2009.
  39. Anton, S. R., Erturk, A., and Inman, D. J., An Investigation on Multifunctional Piezoelectric Composite Spars for Energy Harvesting in Unmanned Aerial Vehicles, Proc. ICCM, 2009.
  40. Erturk, A., Anton, S. R., Kong, N., and Inman, D. J., Self-Powered Boarder Security Systems, 3rd National Security Innovation Competition (presentations of the finalist universities), May 1, 2009.
  41. Anton, S. R., Erturk, A., and Inman, D. J., Piezoelectric Energy Harvesting from Multifunctional Wing Spars for UAVs – Part 2: Experiments and Storage Applications, Proc. SPIE, 2009, Vol. 7288, 72880D-12.
  42. Erturk, A., Anton, S. R., and Inman, D. J., Piezoelectric Energy Harvesting from Multifunctional Wing Spars for UAVs – Part 1: Coupled Modeling and Preliminary Analysis, Proc. SPIE, 2009, Vol. 7288, 72880C-15.
  43. Anton, S. R. and Inman, D. J., Vibration Energy Harvesting for Unmanned Aerial Vehicles, Proc. SPIE, 2008, Vol. 6928, 692824.
  44. Schlichting, A. D., Anton, S. R., and Inman, D. J., Motorcycle Waste Heat Energy Harvesting, Proc. SPIE, 2008, Vol. 6930, 69300B.
  45. Anton, S. R., Erturk, A., Inman, D. J., Energy Harvesting from Small Unmanned Air Vehicles, 17th Intl. Symp. Appl. Ferroelec., 3rd Ann. Energy Harv. Wkshp, 2008.
  46. Erturk, A., Anton, S. R., and Inman, D. J., Energy Harvesting from Rigid Body Motions, Proc. ICAST, 2007.
  47. Anton, S. R., Park, G., Farrar, C. R., Inman, D. J., On Piezoelectric Lamb Wave-Based Structural Health Monitoring using Instantaneous Baseline Measurements, Proc. SPIE, 2007, Vol. 6532, 65320B.
  48. Anton, S., Butland, A., Carrion, M., Buechler, M., Park, G., Instantaneous Structural Damage Identification Using Piezoelectric-Based Lamb Wave Propagation, Proc. IMAC, 2007.

[5] Winner of the Best Student Hardware Paper award at ASME SMASIS 2017.
[6] Winner of the Best Student Paper award at ASME SMASIS 2009.