Jeremy W. Langston

Personal Website

Battery-powered USB Phone Charger

I was getting ready for a long train ride from KY to DC and found out there aren’t any AC outlets for coach seats!  A 15hr ride isn’t too bad when you have a smart-phone; then again, the stock battery on an HTC Incredible will last only about 3hrs of heavy usage.  Not good.  I wanted a way to be able to use it for, well, 15hrs.  So, using some easy-to-find parts I made an extended battery that will charge the phone via USB.  I also wanted the extended battery to be rechargeable.  So, I need to be able to have access to the battery contacts; maybe later I will add something fancier, but for now the battery disconnects from the USB circuitry.  Here’s my finished product, and how to make it.

IMAG0075

I bought a battery from the local Home Depot for $20 (look in the outdoor lighting aisle).  It is 6V and provides 6.5AH.  You can get it cheaper at places like batterymart.com, but I was in a hurry and the shipping on seal-lead acid batteries is not cheap.  The higher the amp-hours (6.5AH in this case), the longer you will be able to run your USB device.

IMAG0064

Now for the voltage – USB uses 5V DC.  I needed to drop the voltage from 6V to 5V, preferably without too much loss.  There are three main options:  voltage divider using resistors, non-switching regulator, and a switching regulator.  In the case of the voltage divider, the resistors basically turn the extra voltage into heat, and they would need to be rated for higher power than the typical $0.01 resistors.  Switching regulators, or DC-to-DC converters, are much higher efficiency, but are more costly.  Also, I couldn’t find one that would work at Radio Shack, so I went with a non-switching regulator:  the 7805.

IMAG0066

The 7805 regulator will take voltages higher than 5V and hold them at 5V, also allowing up to 1A of current.  While that’s much more than is needed, it gives a nice buffer.  A regulator has three legs:  1) input, 2) ground,  and 3) output, where the ground leg is shared between the input and output.  The input comes from the positive side of the battery, the output goes to the 5V pin on a USB connector, and the negative side of the battery along with the GND pin on a USB connector both connect to the ground.  Since the 7805 drops the difference in voltage by heat, adding a heatsink to the regulator might be needed, depending on how much power your device will draw.

IMAG0063IMAG0068

To connect USB devices, I need an adapter that would allow me to plug in a standard USB cable, like the one in your computer.  I happened to have an old PS2/USB adapter from an old mouse.  It hasn’t been used, ever, so I cut it up (the green thing above).  You could use something else, like a USB extension cable which already has wires to solder to.  USB connectors have 4 pins:  1) 5V, 2) Data+, 3) Data-, and 4) GND.  Use some wire to solder the connections (USB 5V -> 7805 Output), (USB GND  and Battery negative -> 7805 Ground), and (Battery positive -> 7805 Input).  Make sure to protect the solder points with some heatshrink or risk shorting, melting, and other bad things.  To connect the wires to the battery terminals, I used spade connectors.  Also, leave the terminals pointing up for reasons I’ll point out soon.

IMAG0067IMAG0069

Once the soldering is done, connect the battery and use a multimeter to check the output on the USB connector (voltage across pin 1 and pin 4 should be +5VDC).  Then you can freely connect a USB device and you’re set.  You could stop here and be done.  Since I wanted this for travel and didn’t want exposed wires, I took it a step further:  enter hot glue.

Clean the top of the battery and add a layer of lubricant (e.g. WD-40) to keep the glue from sticking to the battery.  We want the circuitry to be detachable so that we can recharge the 6V battery using a trickle charger/car charger.  This is why I left the battery terminals sticking up – so that I can freely pull the circuit away from the battery.  I used about 10 – 15 sticks of hot glue used on a mini gun, just to make sure that everything would hold together.  This is the most time-consuming part.  It doesn’t take a lot of thought to do this.  Just fill in all the holes, keeping the USB port accessible.  You also want to keep the heatsink partially uncovered so that it passing air can pull away the heat given off by the 7805 regulator.  You could spend a lot of time getting this pretty by squaring up the sides and making it colored, but this was a last minute project for me.  Hopefully you will get some good use out of this – I know I will.  I hope they don’t kick me off the train thinking it’s a bomb.

IMAG0070IMAG0072

IMAG0077IMAG0078

IMAG0073

50 Comments

  1. Thanks for this wonderful article! hats off to your writing! great post with rich quality content! Very resourceful and informative! Keep posting! Would love to follow up on your upcoming future posts! Check Out The Best Black Friday Offers Here: DigitalOcean Black Friday USA

  2. Its a great idea. Thank you for sharing.

  3. As per the eminent academic experts, students, who are willing to take help from the online academic help services like, should be careful while asking ‘who can do my assignment help completely?

  4. I think you need to expand your idea. Your invention is so tremendous. In my opinion, if you expand your ideas and sell your product in the market. So you will be able to get much amount through this invention.

  5. Our English homework help experts in Canada solve all the assignment related difficulties of students. Most importantly, we provide custom English homework help online in Canada at the best price in the industry.

  6. We offer this essay writing help online at the most competitive price in the industry. You also get a plagiarism report as part of our essay help service.

  7. thank a lot. Appreciating the hard work you put into your website and detailed information you offer. have good time

  8. Pretty good post.
    Get online Case Study Assignment Help from PhD qualified writers in UK at affordable price. Avail our help with case study assignments in UK to secure high grades

  9. Thanks for writing such a quality write-up! I hope other people get much help from this writing piece as well. Students struggling to write their assignments can opt for our online assignment help and get their coursework written by qualified assignment experts.

  10. It is a good website, helpful information given by you.

  11. Very nice post. Thank you for sharing such a informative post.
    Are you searching for Write my Essay Online services? Myassignmenthelp is a pioneer firm to do your essay effectively. Myassignmenthelp provides plagiarism free essay writing help to students who find it difficult to complete their essays available time.

  12. Ultimate USB phone charger. I will try it.
    Do you need homework help? Get an expert homework help tutor online now for your homework help. We help thousands of students to get better grades every day.

  13. Battery – powered USB phone charger is very useful device everyone. Great technology. Thanks for sharing this useful information.
    Are you looking for do my math homework? Myassignmenthelp provide best do my math homework for me service to the student at cheapest cost.

  14. The proponents came up with the topic of engineered design USB flash drive
    inspired by BOLT Group, mainly because as college students, we often use
    computers to complete assignments, projects or thesis. USB Flash Drives offer a
    reliable solution to store and share documents, photos, videos and music.

  15. Extended technology for charging the phone . Great post.
    Are you searching for Write my essay for me services? We provides plagiarism free essay writing help to students who find it difficult to complete their essays available time.

  16. Tremendous innovation . Thanks for sharing this amazing post.
    Are you looking for book report Help? We provide best Book Report Help to the student at cheapest cost.

  17. I was getting ready for a long teaching experience from KY to DC and determined available aren’t any AC shops for educating seats! A 15hr experience isn’t too terrible when you have a clever-smartphone; alternatively, the inventory battery on an HTC remarkable will ultimate simplest approximately 3hrs of heavy usage. now not true. I wanted a way so that it will use it for, well, 15hrs. So, the usage of a few easy-to-locate components I made a prolonged battery a good way to rate the cell phone via USB.

  18. We have recruited some of the most talented and focused scholars and professional writers having degrees in statistics to work for us. They know how to frame the paper by including every technical detail and helpful knowledge, as and when required.

  19. read the contents of article useful for me..!!

  20. Assignment Writing Service is the best USA student for making any kind of assignment, essay, paper, writing, etc, So many students apply for the online service provider website.

  21. this is the maximum time-consuming component. It doesn’t take quite a few idea to try this. simply fill in all the holes, maintaining the USB port available. you furthermore may want to keep the heatsink partly uncovered in order that it passing air can pull away the heat given off via the 7805 regulator.

  22. So, I need for you to have access to the battery contacts; maybe later i will upload some thing fancier, but for now the battery disconnects from the USB circuitry. right here’s my finished product, and how to make it.

  23. Plug inside the instant cell cellphone charger for automated energy ¿ even when cellphone battery is absolutely discharged. Reusable, light-weight, durable, handy, easy to use, portable, rapid. exquisite for moms on the pass, commercial enterprise, enjoyment, contractors, street warriors, and a few emergency conditions

  24. The Energi to go capabilities a patented shrewd manipulate chip that maximizes electricity transfer from the charger to the mobile cellphone as well as strength conversion era to optimize battery overall performance. other capabilities consist of battery leakage safeguards and an LED fee indicator. whilst the Energi to head is out of juice, simply update the batteries with Energizer e2 Lithium AA batteries.

  25. it’s going to paintings with any phone that makes use of a mini USB connector for the charging port. appearance intently on the port on your cellphone and at a few diagrams of what a mini USB connector seems like to peer if they healthy. to add to confusion, a few phones use a micro USB port (as opposed to mini), and others have a proprietary port.

  26. This is a nice journal for the content quality which you have shared here.I am very impressed with your services and view. Keep posting new and valuable information hpe exam questions and answers You did a great job and thanks for sharing.

  27. I needed an approach to have the capacity to utilize it for, well, 15hrs. Along these lines, utilizing some simple to-discover parts I made a broadened battery that will charge the telephone by means of USB. I likewise needed the stretched out the battery to be rechargeable. In this way, I should have the capacity to approach the battery contacts; possibly later I will include something fancier, however, for the time being, the battery separates from the USB hardware.

  28. The information originates from the positive side of the battery, the yield goes to the 5V stick on a USB connector, and the negative side of the battery alongside the GND stick on a USB connector both interface with the ground. Since the 7805 drops the distinction in voltage by warm, adding a heatsink to the controller may be required, contingent upon how much power your gadget will draw.

  29. Clean the highest point of the battery and include a layer of ointment (WD-40) to shield the paste from adhering to the battery. We need the hardware to be separable with the goal that we can revive the 6V battery utilizing a stream charger/auto charger. This is the reason I cleared out the battery terminals staying up – with the goal that I can uninhibitedly pull the circuit far from the battery. I utilized around 10 – 15 sticks of craft glue utilized on a minigun, just to ensure that everything would hold together.

  30. According to the prominent scholarly specialists, understudies, why should willing take assistance from the online scholastic enable administrations to like, ought to be watchful while asking ‘who can do my task help totally?

  31. Visit our website to check the reviews of assignment writing service providers.

  32. This is fabulous article. Thanks so much for sharing.

  33. I’m doing technical engineering I have to submit projects on squares of its real and imaginary components and this info would be helpful for me. Whenever I don’t have time so I prefer Assignment Help Service to get my homework done fast with quality.

  34. It is really a nice ideas. Hope that this ideas will helpful to charge phone while travelling for long distance. Thanks a lot for sharing.

  35. Even though this wasn’t what I was looking for, the information offered serves as good as what I was looking for. Its very familiar with the research work am doing, and therefore its a page worth bookmarking. We always offer help to correct a thesis paper to any client that reaches out to us, and one thing for sure is that you aren’t an exception. Feel very free to let us know when you need our help.

  36. I likewise needed the stretched out the battery to be rechargeable. In this way, I should have the capacity to approach the battery contacts; possibly later I will include something fancier, yet for the present, the battery separates from the USB hardware.

  37. VIVO IPL 11 RCB IPL Tickets 2018 Online Booking: Now we are all waiting to witness the great event of cricket tournament IPL season 11 in the month of April and May 2018.

  38. The Onlinesbi is offering with the best of internet banking services relating to its corporate customers through its portal. It is the corporate internet banking of the CINB facility of the SBI that enables with the process to carry out banking activities for the corporate customers anywhere and anytime which is aided with the power and convenience of the internet.

  39. Clean the highest point of the battery and include a layer of ointment (WD-40) to shield the paste from adhering to the battery. We need the hardware to be separable with the goal that we can revive the 6V battery .

  40. Even though this wasn’t what I became searching out, the statistics offered serves as desirable as what I was seeking out. Its very familiar with the research paintings am doing, and therefore its a web page really worth bookmarking.

  41. Walmart Credit Card Login: As we all know that Walmart is one of the major American retailer companies which are running its business across the globe. When it comes to Walmart, it is mainly functioning with a lot of grocery stores, hypermarkets and department stores.

  42. Mumbai Indians is one of the most balanced teams of IPL and won three IPL titles till 2017. They are the current champion of IPL 2017 and this year in 2018 they will try to defend their title against the seven other IPL teams. The 11th time of the VIVO Indian Premier League will begin on April IPL final 2018 played in Mumbai.

  43. Congrats on having such well managed site! It has good looks and contains informative content as well. We provide Law assignment help for students.

Leave a Reply

Your email address will not be published.

© 2024 Jeremy W. Langston

Theme by Anders NorenUp ↑